How to expand the RAM

Do you have a PC from a few years ago that still works pretty well but gets slow, for example, when you try to run multiple programs simultaneously? Well, know that you can try to speed it up by spending relatively little money and relying solely on your own strength. Suppose you find yourself in a situation like the one described above. In that case, it is advisable to try at least to carry out an operation that can be completed without too many problems, even by yourself. In the following article, we learn how to expand the RAM. So please don’t skip the article from anywhere and read it carefully because it will be very useful for all of you guys.

I am referring to the question of RAM: we, therefore, refer to the memory in which all the data of the processes performed on the PC are temporarily stored. You understand, therefore, that by increasing the latter, you can optimize the system’s performance. Don’t worry if you haven’t understood much: in this tutorial. I will show you how to expand the RAM inside your computer without calling a technician. I know it may seem quite complex to do, but I assure you that you will be amazed by the ease of the operation.

How to expand the RAM of the PC

After having given you the right preliminary indications to allow you to understand your needs better, I would say that it is time to take action and explain how to expand your PC’s RAM.

Whether you are wondering, for example, how to expand the RAM of your Windows 10 PC or that has another OS, below you will find some indications that are right for you. In fact, I’m about to consider the “classic” procedure for computers and Macs and a further possibility for Windows.

How to expand the RAM of the Windows PC

Can’t wait to find out how to expand Windows PC RAM. Don’t worry. The procedure to follow is very simple.

Well, now that you have the new or new RAM banks that I explained to you how to choose in the preliminary chapter, the time has come to turn off the computer, also disconnect from the power socket, and remove all the various and any connected devices. . If it is a notebook with a removable battery, remove that as well.

At this point, take your trusty screwdriver and unscrew all the screws on the sides of your PC case (in some cases, certain computer cases simplify the procedure by allowing you to unscrew the screws even simply “by hand). Go and visit my article and also check out my site. When you are done, remove the side panels and locate the free motherboard slots to insert the RAM, there should be at least one right next to the bank of RAM already installed in the computer.

To install the new memory module, you must place it in the free slot next to the existing RAM bank, obviously paying attention to doing everything in the correct direction and exerting slight pressure. Generally, you should hear a click and notice that the two plastic tabs on the sides now adhere perfectly to the RAM bank, fixing it in its position: this means that the operation was successful.

That’s all: as you have seen, the “legends” around the alleged difficulty of this type of operation are, in fact, legends. To be clear, even if you want to replace the original RAM module with the new one purchased, the procedure is the same. You just have to loosen the tabs from the memory bank installed on the PC, remove the latter and replace it with the new memory.

Bottom Line

You just have to close the case and turn on the computer for the rest. If everything has been done correctly, the system will boot, and you can take advantage of the new amount of RAM at your disposal. You can check this both by the methods I indicated earlier in the course of this tutorial and by the methods in my guide on how to see PC RAM. In short, although there are several variables in the game, as you can see, it is generally very simple in the desktop PC field (the most “complicated” question is perhaps the initial choice of compatible desks, but nowadays, even that becomes child’s play by passing through “automatic” systems).

As for the method to understand how to expand the RAM of a laptop, the question becomes a little more complex. Although the procedure to be carried out is essentially the same as seen above for desktop computers, each laptop has a different arrangement of memory modules. To find housing, it is often necessary to disassemble several internal components. In other cases, however, just unscrew a special door on the back of the notebook.

In short, a lot depends on the type of laptop at your disposal. For this reason, I cannot go into further detail with my indications. What I can do, however, is to direct you to some sources that can allow you to understand better how to disassemble your notebook and “reach” the RAM banks. In this context, I suggest you find the model’s user manual at your disposal, which should contain all the necessary indications to understand which steps to take to expand the RAM. If you do not have the paper user manual of your laptop available, you can search for it on Google by trying to type the laptop name user manual (obviously replacing the laptop name with the name of your laptop).

Also, read HOW TO CREATE RSS FEEDS